/*
ILI9163C - A fast SPI driver for TFT that use Ilitek ILI9163C.
Features:
- Very FAST!, expecially with Teensy 3.x where uses DMA SPI.
- It uses just 4 or 5 wires.
- Compatible at command level with Adafruit display series so it's easy to adapt existing code.
- It uses the standard Adafruit_GFX Library (you need to install).
Background:
I got one of those displays from a chinese ebay seller but unfortunatly I cannot get
any working library so I decided to hack it. ILI9163C looks pretty similar to other
display driver but it uses it's own commands so it's tricky to work with it unlsess you
carefully fight with his gigantic and not so clever datasheet.
My display it's a 1.44"", 128x128 that suppose to substitute Nokia 5110 LCD and here's the
first confusion! Many sellers claim that it's compatible with Nokia 5110 (that use a philips
controller) but the only similarity it's the pin names since that this one it's color and
have totally different controller that's not compatible.
http://www.ebay.com/itm/Replace-Nokia-5110-LCD-1-44-Red-Serial-128X128-SPI-Color-TFT-LCD-Display-Module-/141196897388
http://www.elecrow.com/144-128x-128-tft-lcd-with-spi-interface-p-855.html
Pay attention that can drive different resolutions and your display can be
160*128 or whatever, also there's a strain of this display with a black PCB that a friend of mine
got some weeks ago and need some small changes in library to get working.
If you look at TFT_ILI9163C.h file you can add your modifications and let me know so I
can include for future versions.
Code Optimizations:
The purpose of this library it's SPEED. I have tried to use hardware optimized calls
where was possible and results are quite good for most applications, actually nly filled circles
are still a bit slow. Many SPI call has been optimized by reduce un-needed triggers to RS and CS
lines. Of course it can be improved so feel free to add suggestions.
-------------------------------------------------------------------------------
Copyright (c) 2014, .S.U.M.O.T.O.Y., coded by Max MC Costa.
TFT_ILI9163C Library is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
TFT_ILI9163C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Foobar. If not, see .
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This file needs the following Libraries:
Adafruit_GFX by Adafruit:
https://github.com/adafruit/Adafruit-GFX-Library
Remember to update GFX library often to have more features with this library!
From this version I'm using my version of Adafruit_GFX library:
https://github.com/sumotoy/Adafruit-GFX-Library
It has faster char rendering and some small little optimizations but you can
choose one of the two freely since are both fully compatible.
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Special Thanks:
Thanks Adafruit for his Adafruit_GFX!
Thanks to Paul Stoffregen for his beautiful Teensy3 and DMA SPI.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Version:
0.1a1: First release, compile correctly. Altrough not fully working!
0.1a3: Better but still some addressing problems.
0.1b1: Beta! Addressing solved, now rotation works and boundaries ok.
0.2b1: Cleaned up.
0.2b3: Added 2.2" Red PCB parameters
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
BugList of the current version:
- Actually no scroll commands (only in release will be included).
*/
#ifndef _TFT_ILI9163CLIB_H_
#define _TFT_ILI9163CLIB_H_
#if ARDUINO >= 100
#include "Arduino.h"
#include "Print.h"
#else
#include "WProgram.h"
#endif
#include
//----- Define here witch display you own
#define __144_RED_PCB__//128x128
//#define __22_RED_PCB__//240x320
//---------------------------------------
#if defined(__SAM3X8E__)
#include
#define PROGMEM
#define pgm_read_byte(addr) (*(const unsigned char *)(addr))
#define pgm_read_word(addr) (*(const unsigned short *)(addr))
typedef unsigned char prog_uchar;
#endif
#ifdef __AVR__
#include
#endif
#if defined(__MK20DX128__) || defined(__MK20DX256__)
// #include "mk20dx128.h"
// #include "core_pins.h"
#define __DMASPI
#define CTAR_24MHz (SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0) | SPI_CTAR_DBR)
#define CTAR_16MHz (SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0) | SPI_CTAR_DBR)
#define CTAR_12MHz (SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0))
#define CTAR_8MHz (SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0))
#define CTAR_6MHz (SPI_CTAR_PBR(0) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1))
#define CTAR_4MHz (SPI_CTAR_PBR(1) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1))
#endif
//ILI9163C versions------------------------
#if defined(__144_RED_PCB__)
/*
This display:
http://www.ebay.com/itm/Replace-Nokia-5110-LCD-1-44-Red-Serial-128X128-SPI-Color-TFT-LCD-Display-Module-/271422122271
This particular display has a design error! The controller has 3 pins to configure to constrain
the memory and resolution to a fixed dimension (in that case 128x128) but they leaved those pins
configured for 128x160 so there was several pixel memory addressing problems.
I solved by setup several parameters that dinamically fix the resolution as needit so below
the parameters for this diplay. If you have a strain or a correct display (can happen with chinese)
you can copy those parameters and create setup for different displays.
*/
#define _TFTWIDTH 128//the REAL W resolution of the TFT
#define _TFTHEIGHT 128//the REAL H resolution of the TFT
#define _GRAMWIDTH 128
#define _GRAMHEIGH 160
#define _GRAMSIZE _GRAMWIDTH * _GRAMHEIGH//*see note 1
#define __COLORSPC DTA_MADCTL_BGR//DTA_MADCTL_RGB
#define __GAMMASET1 //uncomment for another gamma
#define __OFFSET 32//*see note 2
//Tested!
#elif defined (__22_RED_PCB__)
/*
Like this one:
http://www.ebay.it/itm/2-2-Serial-SPI-TFT-LCD-Display-Module-240x320-Chip-ILI9340C-PCB-Adapter-SD-Card-/281304733556
Not tested!
*/
#define _TFTWIDTH 240//the REAL W resolution of the TFT
#define _TFTHEIGHT 320//the REAL H resolution of the TFT
#define _GRAMWIDTH 240
#define _GRAMHEIGH 320
#define _GRAMSIZE _GRAMWIDTH * _GRAMHEIGH
#define __COLORSPC DTA_MADCTL_BGR//DTA_MADCTL_RGB
#define __GAMMASET1 //uncomment for another gamma
#define __OFFSET 0
#else
#define _TFTWIDTH 128//128
#define _TFTHEIGHT 160//160
#define _GRAMWIDTH 128
#define _GRAMHEIGH 160
#define _GRAMSIZE _GRAMWIDTH * _GRAMHEIGH
#define __COLORSPC DTA_MADCTL_BGR//DTA_MADCTL_RGB
#define __GAMMASET1
#define __OFFSET 0
#endif
/*
Note 1: The __144_RED_PCB__ display has hardware addressing of 128 x 160
but the tft resolution it's 128 x 128 so the dram should be set correctly
Note 2: This is the offset between image in RAM and TFT. In that case 160 - 128 = 32;
*/
//-----------------------------------------
#define BLACK 0x0000
#define WHITE 0xFFFF
//ILI9163C registers-----------------------
#define CMD_NOP 0x00//Non operation
#define CMD_SWRESET 0x01//Soft Reset
// #define CMD_RDDID 0x04//Read Display Identification Information
// #define CMD_RDDST 0x09//Read Display Status
// #define CMD_RDMODE 0x0A//Read Display power mode
// #define CMD_RDMADCTL 0x0B//Read Display MADCTL (orientation)
// #define CMD_RDPIXFMT 0x0C//Read Display Pixel Format
// #define CMD_RDIMMDE 0x0D//Read Display Image Mode
// #define CMD_RDSNMDE 0x0E//Read Display Signal Mode
//#define CMD_RDSNMDE 0x0F//Read Display Signal Mode
#define CMD_SLPIN 0x10//Sleep ON
#define CMD_SLPOUT 0x11//Sleep OFF
#define CMD_PTLON 0x12//Partial Mode ON
#define CMD_NORML 0x13//Normal Display ON
#define CMD_DINVOF 0x20//Display Inversion OFF
#define CMD_DINVON 0x21//Display Inversion ON
#define CMD_GAMMASET 0x26//Gamma Set (0x01[1],0x02[2],0x04[3],0x08[4])
#define CMD_DISPOFF 0x28//Display OFF
#define CMD_DISPON 0x29//Display ON
#define CMD_IDLEON 0x39//Idle Mode ON
#define CMD_IDLEOF 0x38//Idle Mode OFF
#define CMD_CLMADRS 0x2A//Column Address Set
#define CMD_PGEADRS 0x2B//Page Address Set
#define CMD_RAMWR 0x2C//Memory Write
#define CMD_RAMRD 0x2E//Memory Read
#define CMD_CLRSPACE 0x2D//Color Space : 4K/65K/262K
#define CMD_PARTAREA 0x30//Partial Area
#define CMD_VSCLLDEF 0x33//Vertical Scroll Definition
#define CMD_TEFXLON 0x34//Tearing Effect Line ON
#define CMD_TEFXLOF 0x35//Tearing Effect Line OFF
#define CMD_MADCTL 0x36//Memory Access Control
#define CMD_PIXFMT 0x3A//Interface Pixel Format
#define CMD_FRMCTR1 0xB1//Frame Rate Control (In normal mode/Full colors)
#define CMD_FRMCTR2 0xB2//Frame Rate Control(In Idle mode/8-colors)
#define CMD_FRMCTR3 0xB3//Frame Rate Control(In Partial mode/full colors)
#define CMD_DINVCTR 0xB4//Display Inversion Control
#define CMD_RGBBLK 0xB5//RGB Interface Blanking Porch setting
#define CMD_DFUNCTR 0xB6//Display Fuction set 5
#define CMD_SDRVDIR 0xB7//Source Driver Direction Control
#define CMD_GDRVDIR 0xB8//Gate Driver Direction Control
#define CMD_PWCTR1 0xC0//Power_Control1
#define CMD_PWCTR2 0xC1//Power_Control2
#define CMD_PWCTR3 0xC2//Power_Control3
#define CMD_PWCTR4 0xC3//Power_Control4
#define CMD_PWCTR5 0xC4//Power_Control5
#define CMD_VCOMCTR1 0xC5//VCOM_Control 1
#define CMD_VCOMCTR2 0xC6//VCOM_Control 2
#define CMD_VCOMOFFS 0xC7//VCOM Offset Control
// #define CMD_WRID4VL 0xD3//Write ID4 Value
// #define CMD_NVMEMFC1 0xD5//NV Memory Function Controller(1)
// #define CMD_NVMEMFC2 0xD6//NV Memory Function Controller(1)
// #define CMD_NVMEMFC3 0xD7//NV Memory Function Controller(1)
// #define CMD_RDID1 0xDA//Read ID1
// #define CMD_RDID2 0xDB//Read ID2
// #define CMD_RDID3 0xDC//Read ID3
// #define CMD_RDID4 0xDD//Read ID4
#define CMD_PGAMMAC 0xE0//Positive Gamma Correction Setting
#define CMD_NGAMMAC 0xE1//Negative Gamma Correction Setting
#define CMD_GAMRSEL 0xF2//GAM_R_SEL
// #define DTA_MADCTL_MX 0x40//0x40 or 00
// #define DTA_MADCTL_MY 0x80
// #define DTA_MADCTL_MV 0x20
// #define DTA_MADCTL_ML 0x10
// #define DTA_MADCTL_RGB 0x00
// #define DTA_MADCTL_BGR 0x08
// #define DTA_MADCTL_MH 0x04
class TFT_ILI9163C : public Adafruit_GFX {
public:
TFT_ILI9163C(uint8_t cspin,uint8_t dcpin,uint8_t rstpin);
TFT_ILI9163C(uint8_t CS, uint8_t DC);
void begin(void),
setAddrWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1),
setCursor(int16_t x,int16_t y),
pushColor(uint16_t color),
fillScreen(uint16_t color=0x0000),
clearScreen(uint16_t color=0x0000),
drawPixel(int16_t x, int16_t y, uint16_t color),
drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color),
drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color),
fillRect(int16_t x, int16_t y, int16_t w, int16_t h,uint16_t color),
setRotation(uint8_t r),
invertDisplay(boolean i);
uint16_t Color565(uint8_t r, uint8_t g, uint8_t b);
void setBitrate(uint32_t n);
private:
uint8_t tabcolor;
void writecommand(uint8_t c);
void writedata(uint8_t d);
void writedata16(uint16_t d);
void chipInit();
bool boundaryCheck(int16_t x,int16_t y);
void homeAddress();
#if defined(__AVR__)
void spiwrite(uint8_t);
volatile uint8_t *dataport, *clkport, *csport, *rsport;
uint8_t _cs,_rs,_sid,_sclk,_rst;
uint8_t datapinmask, clkpinmask, cspinmask, rspinmask;
#endif // #ifdef __AVR__
#if defined(__SAM3X8E__)
void spiwrite(uint8_t);
Pio *dataport, *clkport, *csport, *rsport;
uint8_t _cs,_rs,_sid,_sclk,_rst;
uint32_t datapinmask, clkpinmask, cspinmask, rspinmask;
#endif // #if defined(__SAM3X8E__)
#if defined(__MK20DX128__) || defined(__MK20DX256__)
uint8_t _cs,_rs,_sid,_sclk,_rst;
uint8_t pcs_data, pcs_command;
uint32_t ctar;
volatile uint8_t *datapin, *clkpin, *cspin, *rspin;
#endif
};
#endif